ELECTRIC SINGLE-GIRDER SUSPENSION CRANES
PST manufacturing group
Electric single-girder suspension cranes with lifting capacity of 1, 2, 3, 2 tons are designed and suitable for installation in shops and under roof for handling operations
The design of cranes provides compensation of inaccuracies of overhead rails position along the aisle by means of a mobile end beam (cranes of the highest category of quality in accordance with GOST (all-Union State Standard) 7890-84)
Cranes are supplied with performance of full electric installation of control cabinets, with metal structure check assembly, with idle test of all the units. Input lead to the crane: cable or trolley – carried out by the customer
To place the order you should fill out the questionnaire at our site
www.pst.zp.ua in the section "Order" and send to our E-mail:
pst-@mail.ru or mail@pst.zp.ua.
Marketing Department:
Tel. / Fax: +38(061) 289-70-89; 222-02-72
*) These specifications depend on the type of installed electric hoist.
PST manufacturing group
Electric single-girder suspension cranes with lifting capacity of 5 tons are designed and suitable for installation in shops and under roof for handling operations.
The design of cranes provides compensation of inaccuracies of overhead rails position along the aisle by means of a mobile end beam (cranes of the highest category of quality in accordance with GOST (all-Union State Standard) 7890-84).
Cranes are delivered with performance of full electric installation of control cabinets, with metal structure check assembly, with no-load running test of all the units. Input lead to the crane: cable or trolley – carries out the customer
To place the order you should fill out the questionnaire at our site
www.pst.zp.ua in the section "Order" and send to our E-mail:
pst-@mail.ru or mail@pst.zp.ua.
Marketing Department:
Tel. / Fax: +38(061) 289-70-89; 222-02-72
*) These specifications depend on the type of installed electric hoist.
PST manufacturing group
Electric single-girder suspension two-span cranes with lifting capacity 1; 2; 3,2; 5 tons are designed and suitable for installation in shops for handling operations.
Cranes are delivered with performance of full electric installation of control cabinets, with metal structure check assembly, with no-load running test of all the units. Input lead to the crane: cable or trolley – carries out the customer.
To place the order you should fill out the questionnaire at our site
www.pst.zp.ua in the section "Order" and send to our E-mail:
pst-@mail.ru or mail@pst.zp.ua.
Marketing Department:
Tel. / Fax: +38(061) 289-70-89; 222-02-72
*) These specifications depend on the type of installed electric hoist.
PST manufacturing group
Electric single-girder suspension crane with lifting capacity 10 tons is designed and suitable for installation in shops for handling operations.
Crane is delivered with performance of full electric installation of control cabinets, with metal structure check assembly, with no-load running test of all the units. Input lead to the crane: cable or trolley – carries out the customer
Crane has two driving motors for crane traveling gear.
We can manufacture the crane with two hoisting and travel speed of electric hoist.
Control of the crane - from the floor (by means of push-button remote control system connected with crane by cable) or remote control/radio control.
To place the order you should fill out the questionnaire at our site
www.pst.zp.ua in the section "Order" and send to our E-mail:
pst-@mail.ru or mail@pst.zp.ua.
Marketing Department:
Tel. / Fax: +38(061) 289-70-89; 222-02-72
*) These specifications depend on the type of installed electric hoist.